Mazdaspeed6 L4-2.3L Turbo (2006)
3. Remove the tire house trim.
4. Partially peel back the seaming welt.
5. Remove the cap using a fastener remover, and remove the bolt (with curtain air bag system).
6. Disengage clips A and pin B using a fastener remover.
7. Pull the C-pillar trim outward, then disengage the tab from the body.
8. Install in the reverse order of removal.
5-Door
1. Remove the rear scuff plate.
2. Remove the tire house trim.
3. Remove the trunk side upper trim.
4. Turn the seaming welt over.
5. Remove the cap using a fastener remover the bolt. (with curtain air bag system)
6. Disengage clips A and pin B using a fastener remover.
7. Pull the C-pillar trim forward, then disengage the hook from the body.
8. Remove the rear center seat belt tongue from the C-pillar trim. (LH only)
9. Remove the C-pillar trim.
10. Install in the reverse order of removal.
Sport Wagon
1. Remove the rear scuff plate.
2. Remove the tire house trim.
3. Remove the trunk side upper trim.
4. Turn the seaming welt over.
5. Remove the fastener.
6. Pull the C-pillar trim forward, then disengage the clip A and pin B from the body.
