Mazdaspeed6 L4-2.3L Turbo (2006)
7. Shift the selector lever to P position.
8. Drive on city roads at a minimum of 5 km.
9. Adjust the length or thermometer probe so that the length is the same as the depth gauge, and hold the probe with a paper holder. Insert into the
filler tube and measure the temperature.
10. Warm up the engine until the ATF reaches 60 - 70°C (140 - 158°F).
11. Verify that the ATF level is in the range while the engine is idling.
^
If necessary, add ATF to the specification.
ATF type ATF M-V