Mazdaspeed6 L4-2.3L Turbo (2006)
Seals and Gaskets: Service and Repair
Oil Seal (Oil Pump) Replacement [AW6A-EL]
OIL SEAL (OIL PUMP) REPLACEMENT [AW6A-EL]
1. Remove the transaxle.
Caution:
^
The oil seal is easily damaged by the sharp edges of the torque converter splines. Do not let the splines contact the oil seal.
^
Do not drop the torque converter.
^
Do not pinch fingers.
2. Remove the torque converter.
Caution:
^
Do not to damage the bushing on the oil pump body.
3. Using a tape-wrapped flathead screwdriver, remove the oil seal from the oil pump body.
4. Using the SST and a hammer, install the oil seal to the oil pump body
5. Coat the lip of the oil seal-with grease.
6. Install the torque converter.
7. Install, the transaxle.
8. Perform the mechanical system test.
