Mazdaspeed6 L4-2.3L Turbo (2006)
13. Measure the resistance between the coupler component terminals B7 and B8.
^
If there is any malfunction, replace the TFT sensor.
Transaxle fluid temperature (TFT) sensor
14. Install the TFT sensor.
15. Install the control valve body
16. Apply ATF to a new O-ring and install it on the oil pipe.
17. Install the oil pipe and oil hose.
18. Connect the lower radiator hose.
19. Add the engine coolant.
20. Add ATF to the specified level.
21. Install the front crossmember.
22. Install the under cover.
23. Install the air cleaner component and air cleaner bracket.
24. Connect the negative battery cable.
