Mazdaspeed6 L4-2.3L Turbo (2006)
Caution:
^
When replacing components, always replace as a complete set.
^
Due to the automatic adjustment function of clutch cover, if the old cover assembly is reused, it must be reinstalled together with its original clutch
disc.
1. Install the SSTs.
2. Loosen each bolt one turn at a time in a crisscross pattern until spring tension is released.
3. Remove the clutch cover and disc.
Pilot Bearing Removal Note
Note:
^
The pilot bearing does not need to be removed unless you are replacing it.
1. Use the SST to remove the pilot bearing.
Pilot Bearing Installation Note
1. Use the SSTs to install the pilot bearing.
Flywheel Removal Note
1. Hold the flywheel using the SST.