Mazdaspeed6 L4-2.3L Turbo (2006)
Clutch Disc: Testing and Inspection
CLUTCH DISC INSPECTION
1. Using vernier calipers, measure the thickness of the lining at a rivet head on both sides.
^
If it less than the minimum specification, replace the clutch disc.
Minimum clutch disc thickness 0.3 mm (0.012 inch)
2. Measure the clutch disc runout using a dial indicator. If it exceeds the maximum specification, replace the clutch disc.
Maximum clutch disc runout 0.7 mm (0.028 inch)
