Mazdaspeed6 L4-2.3L Turbo (2006)
1. Install the SSTs.
2. Loosen each bolt one turn at a time in a crisscross pattern until spring tension is released.
3. Remove the clutch cover and disc.
A65M-R manual transaxle models
1. Install the clutch aligner and the SST.
2. Loosen each bolt one turn at a time in a crisscross pattern until spring tension is released.
3. Remove the clutch cover and disc.
Pilot Bearing Removal Note
Note:
^
The pilot bearing does not need to be removed unless you are replacing it.
1. Use the SST to remove the pilot bearing.
Flywheel Removal Note
G35M-R manual transaxle models