Mazdaspeed6 L4-2.3L Turbo (2006)
2. Remove the bolts evenly and gradually in a crisscross pattern.
3. Remove the flywheel.
Flywheel Installation Note
Caution:
^
Clean the crankshaft threads before tightening the bolts. The threads may be damaged if the bolts are, tightened with any old sealant remaining.
1. Clean the crankshaft thread holes.
2. Install the flywheel to the crankshaft.
3. Hand-tighten the new flywheel lock bolts.
4. Install the SST to the flywheel.
5. Gradually tighten the flywheel lock bolts in a crisscross pattern.
Tightening torque 151.3 - 161.1 Nm (15.3 - 16.4 kgf.m, 111.6 - 118.8 ft. lbs.)
Clutch Disc Installation Note
1. Hold the clutch disc position using the SST.
Clutch Cover Installation Note
1. Install the SSTs.
2. Tighten the bolts evenly and gradually in a crisscross pattern.
Tightening torque 25 - 33 Nm (2.6 - 3.3 kgf-m, 19 - 24 ft. lbs.)