Mazdaspeed6 L4-2.3L Turbo (2006)
4.
Wipe off old grease in outer (wheel side) joint and clean it with brake cleaner.
NOTE:
The outer (wheel side) joint cannot be disassembled, however, it can be accessed through the joint.
5.
Assemble drive shafts according to Workshop Manual (section 03-13 FRONT DRIVE SHAFT DISASSEMBLY/ASSEMBLY).
6.
Fill new boot (wheel side) with modified grease according to Workshop Manual (ex. CX-7 grease amount: 110-130 g {3.89-4.58 oz.}).
NOTE:
The new boot set includes modified grease (NGK509) for outer (wheel side) joint.
7.
Reinstall front drive shafts according to Workshop Manual (section 03-13 FRONT DRIVE SHAFT REMOVAL/INSTALLATION).
8.
Verify repair.
PART(S) INFORMATION
WARRANTY INFORMATION