mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Shift Mechanism Removal/Installation [G35M-R, A65M-R]|Page 4906 > < Shift Mechanism Removal/Installation [G35M-R, A65M-R]
Page 2
background image

A65M-R manual transaxle models

1. Remove the battery and battery tray.
2. Remove the air cleaner component.
3. Remove the dashboard completely.
4. Remove the SAS control module.
5. Remove the climate control unit. 
6. Remove the rear heat duct. 
7. Remove in the order indicated in the table.
8. Install in the reverse order of removal.
9. After installation, verify that the shift lever can be shifted smoothly into each position.

Select Cable Installation Note 

Shift Mechanism Removal/Installation [G35M-R, A65M-R]|Page 4906 > < Shift Mechanism Removal/Installation [G35M-R, A65M-R]