Mazdaspeed6 L4-2.3L Turbo (2006)
Shift Linkage: Service and Repair
Shift Mechanism Removal/Installation [A26MX-R]
SHIFT MECHANISM REMOVAL/INSTALLATION [A26MX-R]
1. Remove the battery and battery tray.
2. Remove the air cleaner component.
3. Remove the dashboard completely.
4. Remove the SAS control module.
5. Remove the climate control unit.
6. Remove the rear heat duct.
7. Remove in the order indicated in the table.
8. Install in the reverse order of removal.
9. After installation, verify that the shift lever can be shifted smoothly into each position.
Shift Cable and Select Cable Removal Note
