Mazdaspeed6 L4-2.3L Turbo (2006)
12. Verify the correct positioning of the TCM and coupler component.
13. Tighten the TCM mounting bolts.
Tightening torque 19.6 - 29.4 Nm (2.0 - 2.9 kgf-m, 14.5 - 21.6 ft. lbs.)
Caution:
^
Do not use an impact wrench. Hold the manual shaft lever when removing the manual shaft nut, or the transaxle may be damaged.
14. Install the manual shaft lever and the washer.
15. Set the adjustable wrench as shown in the figure to hold the manual shaft lever, and tighten the manual shaft nut.
Tightening torque 9.8 - 14.7 Nm (100 - 142 kgf-cm, 87 - 123 inch lbs.)
16. Install the clip to the selector cable as shown in the figure.
17. Shift the selector lever to P position.
18. Turn the manual shaft lever to P position.
