Mazdaspeed6 L4-2.3L Turbo (2006)
Seals and Gaskets: Customer Interest
Drivetrain - Oil Seepage From Transfer Case
Bulletin No: 03-001/08
Last Issued: 01/09/2008
Subject:
OIL SEEPAGE FROM TRANSFER CASE
APPLICABLE MODEL(S)/VINs
2006-2007 Mazdaspeed6 vehicles with VINs lower than JM1GG12L*7*108052 (produced before July 1, 2006)
DESCRIPTION
Some vehicles may experience oil seepage from the transfer case in the location shown.
This may be caused by insufficient cleaning of the mating surfaces of the front and rear cases before applying sealant.
The cleaning and assembly process has been improved during production.
Customers having this concern should have their vehicle repaired using the following repair procedure.
REPAIR PROCEDURE
1.
Verify customer concern.
2.
Remove transfer case according to Workshop Manual (section 05-17 TRANSFER REMOVAL/INSTALLATION).
3.
Completely remove sealant and oil off contact surfaces and bolt holes of both case halves with Brake Clean.