Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-377003.png)
4. Loosen the camshaft cap bolts gradually in 5 or 6 steps in the order shown.
Caution: Remove the thrust caps only after removing all camshaft caps. Otherwise, the thrust caps can be damaged.
5. Remove the camshaft cap bolts and camshaft caps.
6. Remove the camshafts.
Cylinder Head Removal Note
1. Temporarily install the No.3 engine mount to support the engine.
2. Remove the SST (engine support).
3. Loosen the cylinder head bolts in 2 or 3 steps in the order shown.
4. Remove the cylinder head bolts.
Caution: Removing the LH cylinder head with the rubber Insulator still Installed can damage the knock sensor harness.
5. Remove the cylinder heads.
Cylinder Head Gasket Installation Note
