MPV 4WD V6-180 2954cc 3.0L FI (1989)
Valve Cover Gasket: Service and Repair
CYLINDER HEAD VALVE COVER
Removal
1. Disassemble in the order shown in the figure
Installation.
1. Remove all old silicon sealant from the cylinder head and cover.
2. Coat a new gasket with silicone sealant, and install onto the cylinder head cover.
3. Install the cylinder head cover with new seal washers.
Tightening Torque: 3.4-4.4 N.m (35-45 cm-kg, 30-39 in-lb).