MPV LX 2WD V6-3.0L SOHC (1998)
-
Using the SST and a press, install a new bearing with the smooth side facing the wheel.
ABS Sensor Rotor Assembly Note
-
Using a press, install a new ABS sensor rotor until it contacts the SST
Bearing Collar Assembly Note
1. Remove any grease or oil from the rear axle shaft and new bearing collar.
2. Install the bearing collar onto the rear axle shaft by using the SST if 26,478 N (2,700 kgf, 5,940 lbs.) or less is required to press the collar, replace
the shaft.
