MX-5 Miata L4-1.8L DOHC (1996)
-
Connect data link connector terminals F/P and GND by using a jumper wire.
-
Turn the ignition switch to ON.
-
Tilt the fuel injectors approx. 60 degrees and verify that no fuel leaks from the fuel injector nozzles.
-
If fuel leaks from the fuel injector, replace it.
-
Turn the ignition switch to OFF and remove the jumper wire.
Leakage Specification
If there is more than one drop per 2 minutes, replace the fuel injector.
Volume Test
WARNING: Fuel vapor is hazardous. It can very easily ignite, causing serious injury and damage. Always keep sparks and flames away
from fuel.
-
Firmly affix the fuel injectors to the fuel distributor with wire.
-
Disconnect the fuel injector connectors.
-
Remove the fuel distributor and fuel injectors together with the fuel hoses connected.
-
Connect the SST to the battery and an fuel injector.
-
Check the injection volume by using a graduated container.
