MX-5 Miata L4-2.0L (2008)
6. Secure the tires with wire.
7. Connect the SST (Deployment tool) to the SST (Adapter harness).
8. Connect the SST (Deployment tool) to the battery. Connect the power supply red clip to the positive battery terminal, and the black clip to the
negative battery terminal.
9. Verify that the red lamp on the SST (Deployment tool) is illuminated.
10. Verify that ail persons are standing at least 6 m {20 ft} away from the vehicle.
11. Press the activation switch on the SST (Deployment tool) to operate (deploy) the side air bag module.
12. Disconnect the SSTs (Deployment tool) from the SSTs (Adapter harness).
Pre-tensioner Seat Belt
1. Remove the pre-tensioner seat belt.
2. Connect the SST (Adapter harness) to the pre-tensioner seat belt as shown in the figure.
