MX-5 Miata L4-2.0L (2008)
2. Install the nuts to the side air bag module as shown in the figure, and connect the SST (Adapter harness).
3. Place the padded surface of the side air bag module facing the center of the tire as shown in the figure. To secure the air bag module to the tire
wheel, wrap a wire (cross section 1.25 sq.mm {0.002 sq.in} or more) through the tire and around the bolts at least 4 times.
WARNING: If the air bag module is not properly secured to the tire, the tires may fall over by the impact of operation (deployment) and
cause serious injury. To prevent this, secure the air bag module properly with the padded surface facing the center of the tire
4. Connect the SST (Adapter harness) to the side air bag module as shown in the figure.
5. Stack the tire with the side air bag module on top of two tires without wheels. Stack a tire without a wheel on top of the tire with the side air bag
module, and then stack another tire with a wheel on the very top.
