MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
^
The rack bushing does not need to be removed unless it is being replaced.
1. Depress the locking tab, and carefully remove the rack bushing
Bushing Disassembly Note
Note:
^
The bushing does not need to be removed unless it is being replaced.
1. Carefully break the bushing to remove it.
Tie-rod End Boot Disassembly Note
1. Secure the tie-rod end in a vise.
2. Place a chisel against the boot and hold it at the angle shown.
3. Remove the boot by tapping it with a hammer.
Mounting Rubber Disassembly Note
1. Press the mounting rubber out from the gear housing using the SSTs and a press.
Mounting Rubber Assembly Note
1. Apply soapy water to the rubber part of the mounting rubber.
