Protege L4-1.5L DOHC (1995)
2)
Loosen the door lock striker bolts. Refer to Fig. 2.
3)
Center the door lock striker holes with the holes in the nut plate.
NOTE:
Be sure the nut plate holes are aligned to prevent contact with the body panel.
4)
Verify that the striker is aligned and tighten the door lock striker bolts.
Tightening Torque: 1.8 - 2.7 kgfm
5)
Verify repair.
WARRANTY INFORMATION
(Applies To Verified Customer Complaints On Vehicles Covered Under Normal Warranty. Refer To The SRT Microfiche For Warranty Term
Information)
Warranty Type:
A
Symptom Code:
82
Damage Code:
9G
Part Number Main Cause:
BC1D 58 361
Quantity:
0
Operation Number:
XX0706RX
Labor Hours:
0.2Hrs.
Technical Service Bulletin #
S00195
Date:
950130
`B' and `C' Pillar - Cracking Noise
Bulletin No.: 001/95
Issued: 1/30/95
Revised:
Category
S
Applicable Model/s
1995 Protege
Subject:
CRACKING NOISE AT "B" AND "C" PILLAR
APPLICABLE MODELS/VINS
1995 Protege vehicles with a VIN of JM1BA14**S0100001 through JM1BA14**50155339
DESCRIPTION
