Protege L4-1839cc 1.8L DOHC (1990)
Axle Shaft: Service and Repair
Constant Velocity Type
Overhaul
Fig. 11 Exploded view of driveshaft W/automatic transaxle
DISASSEMBLY / ASSEMBLY
1. Disassemble in the order indicated in the illustration, referring to the disassembly note.
2. Assemble in the reverse order of disassembly indicated in the illustration, referring to the assembly note.
Disassembly Note
Boot Band (1)
NOTE: The boot band does not need to be removed unless you are replacing it.
1. Pry up the locking clips of the boot band.
2. Remove the boot band using pliers.
Outer Ring (3)
1. Mark the outer ring and the shaft for proper reassembly.
2. Remove the outer ring, being careful to keep the free rings from dropping.