Protege L4-2.0L DOHC (2003)
Quarter Window Glass: Service and Repair
QUARTER WINDOW GLASS REMOVAL
1. Remove the C-pillar trim.
2. Apply protective tape along the edge of body and quarter window glass.
3. Make a hole through the sealant except fastener, pin and clip from the inside of the vehicle using an awl.
4. Pass the SST (piano wire) through the hole.
WARNING: Using a SST (piano wire) with bare hands can cause injury. Always wear gloves when using a SST (piano wire).
5. Wind each end of the SST (piano wire) around a bar.
