Protege DX L4-2.0L DOHC (2002)
1. Unclamp the washer.
2. Remove the tie-rod.
Locknut (Adjusting Cover) Disassembly Note
1. Remove the locknut using the SST.
Pinion Shaft and Housing Component Disassembly Note
1. Remove the socket bolts (2 points) which fix the pinion shaft and housing.
2. Hold the pinion shaft as shown, and pull the pinion shaft out and housing component.
Pinion Shaft Component Disassembly Note
1. Push the pinion shaft component out from the valve housing as shown.
