Protege DX L4-2.0L DOHC (2002)
Transmission Position Switch/Sensor: Testing and Inspection
Inspection of Operation
1. Verify that the starter operates only with the IG SW at the START position and the selector lever in P and N positions.
^
If not as specified, inspect for continuity at the TR switch.
2. Verify that the back-up lights illuminate when shifted to R position with the ignition switch at the ON position.
^
If not as specified, inspect for continuity at the TR switch.
Inspection of Continuity
1. Inspect for continuity at the TR switch.
^
If not as specified, replace or adjust the TR switch.
Connector Pin Identifications
4AT Connector Terminal Table
Sport AT Connector Terminal Table