Protege LX L4-1.6L DOHC (2000)
5.
Pull cable down to align the set hole of the air intake link with the boss hole of the blower unit case.
6.
Secure cable back in clip.
7.
Move REC/FRESH select lever to REC then back to FRESH to confirm that the air intake door fully closes when in the FRESH position.
8.
Reinstall glove box.
9.
Verify repair.
WARRANTY INFORMATION
NOTE:
This information applies to verified customer complaints on vehicles covered under normal warranty. Refer to the SRT microfiche for warranty term
information.
