Protege LX L4-1.6L DOHC (2000)
Air Door Cable: Customer Interest
REC/FRESH Air Lever - Does Not Stay in Set Position
Bulletin No: 004/00
Issued: 05/19/00
Revised:
Section
07
Applicable Model/s
1999/2000 Protege
SUBJECT:
REC/FRESH AIR LEVER DOES NOT STAY IN THE SET POSITION.
APPLICABLE MODEL(S)/VIN(s)
All 1999-2000 Protege with VINs lower than JM1BJ22**Y0 192841.
DESCRIPTION
The REC/FRESH select lever will not stay in the FRESH position when doors are closed (windows rolled-up). Customers having this concern should
have their vehicle repaired using the following procedure.
REPAIR PROCEDURE
1.
Verify customer concern.
2.
Remove glove box according to Workshop Manual (section 09-17 INTERIOR TRIM).
3.
Set REC/FRESH select lever to FRESH position.
4.
Pull cable clip tang enough to release the cable.