RX7 2RTR- 1308cc 1.3L Turbo FI (1989)
Installation
Install in reverse sequence
Engine Harness and Vacuum Piping
1. Install the engine harness and vacuum piping as an assembly.
Tightening torque: 19-25 N.m (1.9-2.6 m-kg, 14-19 ft-lb)
2. Connect the heat gauge unit connector and ground.
3. Connect the evaporative hoses to the intermediate housing and oil filler pipe.
Dynamic Chamber Bracket
1. Install the dynamic chamber bracket.
Tightening torque: 19-25 N.m (1.9-2.6 m-kg, 14-19 ft-lb)
2. Connect the knock sensor connector and mount it to the bracket.
Intake Manifold
