RX7 2RTR- 1308cc 1.3L Turbo FI (1989)
Intake Manifold: Technical Service Bulletins
Sub Zero Starting Assist Device - Discontinued
Category F
Applicable Model/s 1989-90 RX-7 (except CA)
Subject DISCONTINUED SUB-ZERO STARTING ASSIST DEVICE
Bulletin No.
005/90
Issued
6/13/90
Revised
DESCRIPTION
Installation of the sub-zero starting assist device on the subject model has been discontinued since the August 21, 1989 production. In accordance with
this design change, the configuration of the oil pan, extension manifold, and intake manifold have been modified. If replacement of these parts becomes
necessary, please keep the notes below in mind.
VIN OF PRODUCTION CHANGE
JM1FC3***L0801559
August 21, 1989
PARTS INFORMATION
NOTES FOR PARTS REPLACEMENT
1.
Oil Pan - w/ & w/o Turbo
The new oil pan has no mounting eye for a thermo switch. Therefore, discard the old thermo switch and wrap the connector with electric tape
to prevent a short circuit.
2.
Extension Manifold - w/o Turbo 3. Intake Manifold - w/ Turbo
Remove and discard the following parts:
Remove and discard the following parts:
a)
Starting Fluid Valve a) Starting Fluid Valve
b)
Starting Fluid Hose b) Starting Fluid Hose
c)
Starting Fluid Tank c) Starting Fluid Tank
IMPORTANT:
This bulletin is a revision of Service Bulletin Category 4, no. 072/89. Please reference this bulletin when using your 1989 Service Bulletin file.