Tribute 2WD L4-2.3L (2005)
Hose/Line HVAC: Service and Repair
Suction Accumulator to Compressor Line
Removal and Installation
1. Remove the nuts from the A/C manifold and tube mounting bracket.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
2. Disconnect the A/C manifold and tube from the suction accumulator. See SPRING LOCK COUPLING.
3. Remove the front bumper cover.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
4. Remove the nut and disconnect the A/C manifold and tube to A/C condenser core air conditioning line (peanut) fitting.
5. Position aside the cruise control actuator assembly.
1. Disconnect the electrical connector.
2. Disconnect the electrical harness pin-type retainers.
3. Remove the nuts.
6. Raise and support the vehicle. See LIFTING.
