Tribute 2WD L4-2.3L (2005)
11. Apply a bead of urethane adhesive to the bottom of the windshield glass outside the foam dam.
12. Install the windshield by aligning it to the marks previously made.
CAUTION: Carry out this step after the urethane has cured.
13. Check the windshield glass installation for air or water leaks through the urethane seal.
14. If necessary, remove excess urethane adhesive from the outside surface of the windshield glass.
15. Install the cowl grille.
16. Reposition the front portion of the headliner.
17. Install the overhead console.
1. Position the overhead console. If equipped, connect the electrical connector.
2. Install the screws.
18. Install the two sunvisor clips
1. Position the sun visors and clips.
2. Install the six screws.
19. Install the rear view mirror.
20. Install the two windshield side garnish mouldings.
21. Install the two A - pillar passenger assist handles.
1. Position the two assist handles.
2. Install the four bolts.
