Tribute 2WD L4-2.5L (2009)
Thermostat Housing: Service and Repair
-
THERMOSTAT HOUSING REMOVAL/INSTALLATION - 2.5L
NOTE:The thermostat and thermostat housing are serviced as an assembly.
1. With the vehicle in NEUTRAL, position it on a hoist. See See: Maintenance/Vehicle Lifting/Service and Repair/Lifting.
2. Drain the cooling system. See - See: Coolant/Service and Repair/Removal and Replacement.
3. Remove the accessory drive belt. See - See: Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair.