Tribute 2WD L4-2.5L (2009)
4. Remove the 3 bolts and reposition the thermostat housing to gain access to the hose clamps.
-
Remove and discard the gasket.
-
To install, tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
5. Disconnect the heater hose at the thermostat housing.
6. Disconnect the lower radiator hose at the thermostat housing.
7. To install, reverse the removal procedure.
-
Install a new gasket.
8. Fill and bleed the cooling system. See - See: Coolant/Service and Repair/Removal and Replacement.
