Tribute 2WD V6-3.0L (2008)
7. Bend the retaining tab away from the pressure sensor, then slide the pressure sensor oft the bracket.
8. Remove the 2 rivets and detach OCS ECU from the seat cushion pan.
CAUTION: Care must be taken to prevent damage to the seat cushion pan when removing the rivets. Failure to follow these instructions
may result in vehicle damage, equipment damage, component damage and/or system failure.
9. Remove the OCS.
-
Pull all the OCS components (hose, pressure sensor, wire harness, ECU and connectors) through the seat cushion pan opening.
Installation
