Testing and Inspection: Tribute 4WD L4-23L (2005) Drive/Propeller Shaft Component Information
3. Remove the ground strap bolt.
Caution: Do not reuse rear driveshaft joint bolts. Install new bolts only or damage to the vehicle may occur.
4. Remove the rear driveshaft universal joint caps.
1. Index-mark the pinion and yoke to the rear of the driveshaft.
2. Remove and discard the bolts and straps.
Caution: Do not reuse the CV joint bolts and washers. Install new bolts and washers only or damage to the vehicle may occur.
5. Remove the six front driveshaft to power take off bolts and washers.
^
Discard the bolts and washers.
Caution: Do not reuse center bearing nuts. Install new nuts only or damage to the vehicle will occur.