Tribute 4WD L4-2.3L Hybrid (2008)
Brake Rotor/Disc: Removal and Replacement
-
BRAKE DISC REMOVAL/INSTALLATION - HYBRID
NOTE: The following two steps must be followed to prevent the accumulator from charging and pressurizing the brake system.
1. Disconnect the battery. See See: Starting and Charging/Battery/Service and Repair/Procedures/Battery Disconnect.
2. Remove the battery junction box (BJB) fuses 9 (50A) and 18 (50A).
3. Remove the brake caliper anchor plate. See See: Brake Caliper/Service and Repair/Brake Caliper Anchor Plate Removal/Installation.
4. Remove the brake disc.
5. To install, reverse the removal procedure.
