Tribute 4WD L4-2.3L Hybrid (2008)
Harmonic Balancer - Crankshaft Pulley: Specifications
Crankshaft Pulley
CAUTION: Do not loosen or remove the crankshaft pulley bolt without first installing the special tools. The crankshaft pulley and crankshaft timing
sprocket are not keyed to the crankshaft. The crankshaft, the crankshaft sprocket and the pulley are fitted together by friction, using diamond washers
between the flange faces on each part. For that reason, the crankshaft sprocket is also unfastened if you loosen the pulley bolt. Before any repair
requiring loosening or removal of the crankshaft pulley bolt, the crankshaft and camshafts must be locked in place by the special service tools, otherwise
severe engine damage can occur. See: Service and Repair
Tighten the crankshaft pulley bolt in 2 stages:
Stage 1:.................................................................................................................................................................Tighten to 100 Nm {10.2 kgf-m, 74 ft-lbf}.
Stage 2:................................................................................................................................................................Tighten an additional 90 degrees (1/4 turn).
