mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Temperature Blend Door Actuator - LH Removal/Installation|Page 4052 > < Temperature Blend Door Actuator - LH Removal/Installation|Page 4050
Page 2
background image

3. Working through the passenger air bag module opening, remove the RH panel duct screw.

4. Working through the passenger air bag module opening, remove the upper RH center panel duct screw.

5. Remove the lower RH center panel duct screw. 

a. Detach the wire harness pin-type retainer.

b. Remove the lower RH center panel duct screw.

NOTE: The lower RH center panel duct screw is located just below the RH lower rear corner of the audio unit.

Temperature Blend Door Actuator - LH Removal/Installation|Page 4052 > < Temperature Blend Door Actuator - LH Removal/Installation|Page 4050