Tribute 4WD L4-2.5L Hybrid (2009)
12. Release the seat latch cable from the retractor.
13. Remove the 2 nuts and the safety belt guide.
-
To install, tighten to 40 Nm {4.1 kgf-m, 30 ft-lbf}.
14. Remove the nut and the rear center safety belt retractor.
-
To install, tighten to 40 Nm {4.1 kgf-m, 30 ft-lbf}.
15. To install, reverse the removal procedure.
16. Check the active restraint system for correct operation.
-
Make sure that after the rear safety belt retractor is installed, the retractor is not in the automatic locking retractor (ALR) mode. See - See:
Description and Operation.
