Tribute 4WD L4-2.5L Hybrid (2009)
8. Unzip the backrest trim cover zipper.
9. Squeeze together the tip of each head restraint sleeve and pull the 4 sleeves out of the frame tube.
NOTE:The inboard and outboard head restraint sleeves are not interchangeable.
NOTE:The head restraint sleeves incorporate an alignment tab that must be aligned correctly when installed.
10. Separate the hook-and-loop fasteners and remove the seat backrest trim cover.
CAUTION:Use care when separating the seat upholstery from the hook-and-loop strip, or the hook-and-loop strip can be torn from the seat backrest
foam pad.
11. Remove the backrest foam pad from the backrest frame.