Tribute 4WD L4-2.5L Hybrid (2009)
-
To install, tighten the rear bolts to 115 Nm {11.7 kgf-m, 85 ft-lbf}.
-
To install, tighten the rear bolts to 103 Nm {10.5 kgf-m, 76 ft-lbf}.
2. Install a new exhaust hanger on the subframe.
3. Position the 4 rear control arms into the subframe.
-
Loosely install the bolts.
NOTE:The vehicle must be at ride height before tightening the bolts.
4. Position the 4 rear control arms in the subframe.
-
Loosely install the bolts.
Vehicles with AWD
1. Install the rear axle assembly. See See: Transmission and Drivetrain/Differential Assembly/Service and Repair.
All Vehicles
1. Tighten the 4 rear control arms bolts.
-
Tighten to 115 Nm {11.7 kgf-m, 85 ft-lbf}.
