Tribute 4WD L4-2.5L Hybrid (2009)
Replacement/Spring Removal/Installation [Rear Suspension].
2. Remove and discard the rear wheel hub nut.
3. Remove the anti-lock brake sensor harness-to-body retainer bolt.
4. Remove the nut and separate the lower ball joint.
NOTE:Support the wheel knuckle.
5. Remove the 4 differential housing-to-front insulator bracket bolts.
6. Remove the 3 side insulator bracket-to-rear axle differential bolts.
7. Remove the rear differential mount-to-subframe bolt and nut.
8. Using the Halfshaft Remover Tool, remove the halfshaft from the differential.
CAUTION:Do not damage the oil seal when removing the axle halfshaft from the differential.
NOTE:Support the halfshaft inner joint.
9. Using the Front Hub Remover, separate the halfshaft from the rear axle hub assembly.
-
Remove the halfshaft.
Installation