Tribute ES 4WD V6-3.0L DOHC (2002)
Trunk / Liftgate Lock Cylinder: Service and Repair
LIFTGATE LOCK CYLINDER
Removal and Installation
NOTE: Individual lock cylinders are repaired by discarding the inoperative cylinder and building a new lock cylinder using the appropriate lock repair
package. The lock repair package includes a detailed instruction sheet to build the new lock cylinder to the current key code of the vehicle.
1. Remove the liftgate trim panel.
2. Remove the lock cylinder.
1. Disconnect the actuating rod.
2. Remove the nuts.
3. Remove the lock cylinder.
3. To install, reverse the removal procedure.