Tribute ES 4WD V6-3.0L DOHC (2002)
Front Door Exterior Handle: Service and Repair
Removal and Installation
1. Remove the front door trim panel. Refer to FRONT DOOR TRIM PANEL.
2. Position the watershield aside.
NOTE: The tie strap does not need to be reinstalled.
3. If equipped, remove the tie strap from the anti-theft guard.
4. Remove the screws and position the anti-theft guard aside.
5. Release the clip and disconnect the exterior door handle actuating rod.
6. Remove the anti-theft guard.
7. Remove the exterior door handle screw.
