Tribute LX 2WD V6-3.0L DOHC (2001)
4.
Reach in with a small screwdriver and insert screwdriver into latch assembly at outside base of electrical connector below metal actuating lever
and pry up.
NOTE:
If lever will not move freely, cycle the door lock button and door handle to free lever.
5.
Remove rear door latch according to Workshop Manual (section 09-14 SECURITY AND LOCKS).
Installation
1.
Install new latch according to Workshop Manual (section 09-14 SECURITY AND LOCKS).
2.
Install door trim panel according to Workshop Manual (section 09-17 INTERIOR TRIM).
3.
Install rear seat cushion.
4.
Verify repair.
