mazda Workshop Repair Guides

Mazda Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Front Bumper Cover / Fascia: Service and Repair

1. Remove the six pin-type retainers (three each side).

2. Remove the four front bumper cover bolts (two each side).

3. Remove the two front bumper cover to front fender pin-type retainers (one each side).
4. If equipped, disconnect the fog lamp electrical connectors.

5. Remove the lower front bumper cover bolts.

Body and Frame > Bumper > Front Bumper > Front Bumper Cover / Fascia > System Information > Service and Repair

< PREV PAGE NEXT PAGE >