Tribute LX 2WD V6-3.0L DOHC (2001)
13.
Position the front and rear door weatherstrips aside and remove the upper B-pillar trim panel.
14.
Remove the front and rear door scuff plates.
15.
Remove the lower B-pillar trim to gain access to the screw that is horizontal in the door panel and remove the screw.
16.
Remove the screw from front door latch release handle bezel and remove bezel.
17.
Remove door handle cup screw.
18.
Remove the door panel plastic clips to gain access to the door latch.
NOTE:
^
One screw at top front corner of door panel, which touches dash, cannot be removed until door is open.
^
Starting at top right corner of door panel moving clockwise, remove door panel.
19.
Position aside the door panel.
