Tribute LX 2WD V6-3.0L DOHC (2001)
16. Connect the special tool to the steering column harness side of the driver air bag module electrical connector.
17. Connect the battery ground cable.
18. Prove out the air bag system.
19. Remove the seat track to floor nuts.
20. Position the driver seat rearward.
21. If equipped with power seats, disconnect the negative battery cable.
CAUTION: Use care when handling the seat and track assembly. Dropping the assembly or sitting on a seat not secured in the vehicle may result
in damaged components.
22. Remove the driver seat.
1. If equipped with power seats, disconnect the electrical connector.
2. Remove the seat track to floor bolts.
3. Remove the driver seat.
