Tribute LX 2WD V6-3.0L DOHC (2001)
28. Connect the passenger air bag module electrical connector.
29. Raise the glove compartment.
1. Depress the locking tabs.
WARNING: The air bag is for restraint system service only. Remove from vehicle prior to road use. Failure to remove could result in
injury and possible violation of vehicle safety standards.
30. Remove the special tool from the steering column harness side of the driver air bag module electrical connector.
31. Connect the driver air bag module electrical connector.
32. Install the driver air bag connector access cover.
33. Connect the battery ground cable.
34. Prove out the air bag system. For additional information, see AIR BAG AND SAFETY BELT PRETENSIONER SUPPLEMENTAL
