Tribute LX 2WD V6-3.0L DOHC (2001)
23. Remove the special tool from the steering column harness side of the driver air bag module electrical connector.
24. Connect the driver air bag module electrical connector.
25. Install the driver air bag connector access cover.
26. Connect the battery ground cable.
27. Prove out the air bag system. For additional information, see AIR BAG AND SAFETY BELT PRETENSIONER SUPPLEMENTAL
RESTRAINT SYSTEM (SRS).
28. Check the restraint system for correct operation.
Passenger Seat
Disassembly Note
WARNING: Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag
module. This will reduce the risk of injury in the event of an accidental deployment.
WARNING: Carry a live side air bag module with the air bag and tear seam pointed away from your body. This will reduce the risk of injury
in the event of an accidental deployment.
WARNING: Do not set a live side air bag module down on the cover tear seam. This will reduce the risk of injury in the event of an accidental
deployment.
WARNING: After deployment, the air bag surface can contain deposits of sodium hydroxide, a product of the gas generant combustion that is
irritating to the skin. Wash your hands with soap and water afterward.
WARNING: Never probe the connectors on the air bag module. Doing so can result in air bag deployment, which can result in personal injury.